DCL hermetic filter driers are optimised for HFC and HCFC refrigerants and mineral or benzene oils.
Compatible with refrigerants R22, R32, R134a, R404A, R410A, R407C, R23, R600, R600a, R744, R1234yf, R1234ze, R407f, R290, R452A , R444B, R449A, R448A and R450A.

This product is approved for R290, R600 and R600a by ignition source assessment in accordance to standard EN13463-1. Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for flammable refrigerants.

The filter driers are hermetic and approved for up to 46 bar, depending on type. The filter driers are delivered with flare or copper/copper plated steel connections.

DML hermetic filter driers are optimised for HFC refrigerants and mineral or benzene oils. Compatible with refrigerants R22, R32, R134a, R404A, R410A, R407C, R23, R600, R600a, R1234yf, R1234ze, R407f, R290, R452A, R444B, R449A, R448A and R450A.

This product is approved for R290, R600 and R600a by ignition source assessment in accordance to standard EN13463-1. Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for flammable refrigerants.

The filter driers are hermetic and approved for up to 46 bar, depending on type. The filter driers are delivered with flare or copper/copper plated steel connections.

DCR ELIMINATOR® filter driers protect refrigeration, freezing and air conditioning systems from moisture, acids and solid particles.

DCR filter drier is a parts program consisting of a DCR housing, a top cover and exchangeable core inserts type 48-DM, 48-DC, 48-DA and 48-F.
DCR filter driers are for use in liquid and suction lines in refrigeration plants with fluorinated refrigerants.
Available with steel and copper connections.

Core types:
48-DC for HCFC and CFC systems.
48-DM for HFC systems.
48-DA for acid adsorption after burnout.
48-F strainer for retaining dirt.

Hermetic bi-flow filter driers, type DCB, are for use in liquid lines on heat pumps. The filter driers have built-in check valves which ensures that refrigerant liquid always flows through the filter drier from the outer side of the filter core towards the center. Thus all dirt particles are retained irrespective of flow direction.
The DCB hermetic bi-flow filter driers ensure fast and effective adsorption of moisture as well as organic and inorganic acids.

Hermetic bi-flow filter driers, type DMB, are for use in liquid lines on heat pumps. The hermetic bi-flow filter driers have built-in check valves which ensure that refrigerant liquid always flows through the filter drier from the outer side of the filter core towards the center. Thus all dirt particles are retained irrespective of flow direction. DMB hermetic bi-flow filter driers ensure fast and effective adsorption of moisture as well as organic and inorganic acids.

Eliminator© hermetic burn-out filter driers type DAS are used in the suction line to clean up refrigeration and air conditioning systems with fluorinated refrigerants after a compressor motor burn-out.
The solid core, which is composed of 70% activated alumina and 30% Molecular Sieve, adsorbs harmful acids as well as moisture. By adsorbing these acids, the DAS hermetic burn-out filter drier protects the new compressor against failure.

DCC hermetic receiver filter drier is a combined receiver and filter drier for use in small hermetic refrigeration systems with thermostatic expansion valve. Under operation conditions where the condenser cannot contain the total quantity of refrigerant, an extra receiver might be necessary.
This extra receiver capacity can be provided by using a DCC combined receiver and filter drier.

DMC hermetic receiver filter drier is a combined receiver and filter drier, and is optimized to systems where the condenser is incapable of containing the total quantity of refrigerants. DMC hermetic receiver filter driers contain a solid core consisting of 100% Molecular Sieve, and are especially suitable for air conditioning systems with HFC refrigerant and polyolester oil with additives.

DMT Hermetic Filter Drier is specially designed for Transcritial CO2 applications that support up to 140 bars. The filter driers are delivered with flare or copper plated steel connections.